# Hardwood Refinishing Whitby, ON | Whitby Hardwood Refinishing: Dustless + Install for Residential & Commercial | NWFA

URL: https://hardwoodrefinishingtoronto.ca/service-areas/whitby/

![Hardwood refinishing crew sanding an oak floor with HEPA extraction in a GTA home](/images/misc/hardwood-refinishing-crew-sanding-oak-floor-with-l.webp)

Serving Brooklin, Downtown Whitby, Port Whitby and more

# Hardwood Refinishing in Whitby and Brooklin, Plus New Floor Installs

Hardwood refinishing in Whitby covers older homes in Downtown Whitby and Port Whitby with solid floors to restore, and newer Brooklin, Williamsburg and Taunton North subdivisions where owners upgrade to solid oak installs.

Last updated: October 31, 2026

-   24-hour quote
-   Festool HEPA dustless
-   From $3/sq ft, written quote first

Request a Free Written Quote

[/contact/ →](/contact/)

 

Call (647) 503-3932

[tel:+16475033932 →](tel:+16475033932)

-   20+ Years Founded 2005
-   $2M Liability + WSIB COI in 24 hours
-   NWFA Certified Installer + Craftsman
-   500+ Projects 5.0-star satisfaction
-   24-Hr Written Quote 5-year warranty

Local Floor Problems

## Whitby Hardwood Refinishing and Installation Problems

### Builder floors in Brooklin subdivisions north of the 407

Your Brooklin home came with builder-grade flooring and carpeted stairs, and both look worn long before you planned to redo them.

Why it happens here: Brooklin's subdivisions have gone up since the mid-1990s, and many were finished with builder-grade floors that have little wear layer to sand.

Our fix: We install solid oak or engineered hardwood and recap the stairs to match. Downtown Whitby and Port Whitby homes with older solid floors usually get a dustless refinish instead.

Get a Free Floor Assessment

[/contact/ →](/contact/)

-   ### Humidity swings
    
    GTA air runs from humid summers to dry, heated winters. Boards swell, then shrink, leaving cupping near exterior walls and gaps beside heat sources.
    
    Our fix: Moisture reading first, then board replacement and feather-sanding where needed
    
-   ### Winter salt and grit
    
    Boots carry salt across entries and kitchens all winter. The finish in those lanes usually breaks down within 3-4 winters.
    
    Our fix: Screen and recoat while the finish is still intact
    
-   ### Floors already sanded before
    
    Older oak and engineered veneers have limited wood left. An aggressive sand can expose tongues or the engineered core.
    
    Our fix: Thickness check at a vent before any quote
    

Services and Pricing

## Installs, Recaps and Refinishing

The same crews, Festool HEPA equipment and published per-sq-ft rates behind our 

Toronto hardwood refinishing

[/ →](/)

 work, with no surprise surcharges. Most requested here: 

Hardwood Floor Installation

[/services/hardwood-floor-installation/ →](/services/hardwood-floor-installation/)

.

Most requested in this area

 

![Hardwood floor sanding Toronto: Lagler Trio sander with Festool HEPA extraction on red oak](/images/misc/lagler-trio-planetary-sander-connected-to-festool-.webp) Most Requested

### Hardwood Floor Sanding and Refinishing

$3-$5/sq ft

Full sand-to-bare-wood refinishing: 3-grit progression, custom stain and a 3-coat Bona Traffic HD build. $3-$5/sq ft.

3-grit progression 36/60/100 on Lagler Trio . Festool HEPA extraction on every sander

View floor refinishing details

[Hardwood Floor Sanding and Refinishing →](/services/hardwood-floor-refinishing/)

 

![Hardwood floor installation Toronto: installer nailing white oak boards over underlayment](/images/misc/installer-kneeling-while-nailing-white-oak-hardwoo.webp) NWFA Certified

### Hardwood Floor Installation

$7-$18/sq ft

Solid and engineered hardwood, nail-down, glue-down or floating, in straight, herringbone, chevron, parquet, diagonal and picket layouts. $7-$18/sq ft installed.

Nail-down, glue-down and floating installs . Acclimation, MC testing, vapor barrier, expansion gaps

View installation details

[Hardwood Floor Installation →](/services/hardwood-floor-installation/)

 

![Stair refinishing Toronto: recapped oak staircase with stained treads and white risers](/images/misc/newly-recapped-oak-staircase-with-stained-bullnose.webp) Carpet-to-Hardwood

### Staircase Refinishing and Recapping

$15-$200/step

Refinish existing treads from $15-$40/step or recap carpeted stairs with new oak treads from $100-$200/step. 14-step recap $2K-$3.5K in 2-3 days.

Carpet and tack strip removal . Solid oak bullnose treads and new risers

View stairs details

[Staircase Refinishing and Recapping →](/services/staircase-refinishing-recapping/)

More services

 

![Engineered hardwood refinishing Toronto: Lagler Trio on engineered oak in a King West condo](/images/misc/lagler-trio-sander-on-engineered-oak-floor-in-empt.webp) Others Refuse, We Measure

### Engineered Hardwood Refinishing

$4-$8/sq ft

We measure the wear layer before quoting. 2mm+ veneers are refinished with a light-grit 80/100/120 progression. $4-$8/sq ft.

Wear-layer measurement before quoting (2mm+ minimum) . Light-grit 80/100/120 progression

View engineered refinishing details

[Engineered Hardwood Refinishing →](/services/engineered-hardwood-refinishing/)

 

![Screen and recoat Toronto: 17-inch orbital with a 180-grit screen on a dull oak floor](/images/misc/17-inch-orbital-floor-buffer-with-180-grit-screen-.webp) One Day, No Sanding

### Screen and Recoat

$2-$3/sq ft

No-sand one-day refresh: 180-grit screen on a 17-inch orbital and a fresh topcoat. $2-$3/sq ft.

One-day turnaround . 180-grit screen on 17-inch orbital

View screen & recoat details

[Screen and Recoat →](/services/screen-and-recoat/)

 

![Dustless hardwood refinishing Toronto: Festool HEPA extractor connected to a floor sander](/images/misc/festool-ctm-hepa-dust-extractor-with-hose-connecte.webp) 99.97% Capture

### Dustless Hardwood Sanding

$3-$5/sq ft

Festool HEPA extraction connected to the Lagler Trio, edger and palm sanders. 99.97% capture, pet-safe. Included in published rates.

Festool HEPA, 99.97% particle capture . Connected Lagler Trio, edger and palm sanders

View dustless sanding details

[Dustless Hardwood Sanding →](/services/dustless-sanding/)

![Vinyl flooring installation Toronto: oak-look LVP clicked into place in a basement suite](/images/misc/oak-look-luxury-vinyl-plank-being-clicked-into-pla.webp)

### Vinyl Flooring Installation

$5-$12/sq ft

LVP, LVT and waterproof vinyl installed over levelled subfloors. $5-$12/sq ft installed.

LVP, LVT and rigid-core waterproof vinyl . Subfloor levelling and moisture testing

View vinyl flooring details

[Vinyl Flooring Installation →](/services/vinyl-flooring-installation/)

![Laminate flooring installation Toronto: 12mm oak-look planks over underlayment](/images/misc/12mm-oak-look-laminate-planks-being-clicked-togeth.webp)

### Laminate Flooring Installation

$4-$9/sq ft

12mm AC4-rated click-lock laminate with proper underlayment and expansion gaps. $4-$9/sq ft installed.

12mm AC4-rated click-lock . Underlayment and vapor barrier

View laminate flooring details

[Laminate Flooring Installation →](/services/laminate-flooring-installation/)

How It Works

## How a New Floor Goes In

1.  1
    
    ### Call or send the form
    
    Phones are answered 24/7. Tell us your neighbourhood, the rooms and roughly how many square feet.
    
2.  2
    
    ### Measure and moisture check
    
    Within 2-3 days we measure, read moisture with a pin-type meter and check how much wood is left.
    
3.  3
    
    ### Written per-sq-ft quote
    
    Every line in writing within 24 hours of the visit: sanding, stain, finish, repairs and access.
    
4.  4
    
    ### Dustless sand and finish
    
    Lagler Trio with Festool HEPA, then 3 coats of Bona Traffic HD. Socks at 24 hours, furniture by day 7.
    

## Replacing Builder Flooring? Get a Written Quote

Free on-site measure, a written per-sq-ft quote before any work, nothing due upfront on jobs under $3K and a 5-year workmanship warranty.

Call (647) 503-3932

[tel:+16475033932 →](tel:+16475033932)

 

Get a Written Quote

[/contact/ →](/contact/)

Why Us

## Why Brooklin Homeowners Choose Us

### NWFA Certified Installer for Brooklin new builds

### Dustless refinishing for older downtown homes

### Subfloor moisture testing before installs

### Written quote within 24 hours

Local Know-How

## Brooklin Growth and Older Downtown Homes: Local Know-How

Whitby splits north and south. **Brooklin** has grown rapidly since the early 1990s, and its newer subdivisions drive most of our installation work: solid oak upgrades and matching stair recaps.

Brooklin's historic downtown became a heritage district in 2008, and **Downtown Whitby** and **Port Whitby** have older homes with solid floors worth refinishing.

The 2016 opening of Highway 407 just south of Brooklin made the north end a quick trip for our crews.

### Brooklin New Builds and Downtown Whitby Character Homes

Brooklin's newer subdivisions drive 

installation upgrades

[/services/hardwood-floor-installation/ →](/services/hardwood-floor-installation/)

, from builder-grade to solid oak at $7-$18/sq ft installed. Downtown Whitby and Port Whitby have older homes with solid floors that we refinish dustless. A 1,000 sq ft refinish takes about 3 days.

Downtown Whitby and Port Whitby have homes from the late 1800s to the 1950s, with original oak and pine that rewards a 

careful refinish

[/services/hardwood-floor-refinishing/ →](/services/hardwood-floor-refinishing/)

. We check thickness at a floor vent, set any raised nails and sand with a planetary machine. Williamsburg, Taunton North and Rolling Acres are mostly 1990s-2010s homes with solid oak or engineered floors and carpeted stairs. In Brooklin's newest subdivisions, owners often replace builder-grade floors with solid white oak or wide-plank engineered, with herringbone in the foyer at a $2-$4/sq ft pattern premium.

### Whitby and Brooklin Access

We reach Downtown Whitby and Port Whitby via the 401 and Brock Street, and Brooklin via the 407 and Baldwin Street. Installation jobs include a delivery and acclimation window before work starts.

Brooklin is reached via the 407 and Baldwin Street. Installation materials are delivered early to acclimate, and the full schedule, including stair work, is in the written quote.

### New-Build Subfloors

Newer Brooklin homes can still have construction moisture in the subfloor, so we test before every install.

Before and After

## Recent Work Near You

Empty rooms, real light, different angles. Drag to compare.

![Before hardwood refinishing in a GTA family home: worn oak floor](/images/misc/before-empty-gta-family-home-living-room-with-worn.webp) ![After hardwood refinishing in a GTA family home: refreshed natural oak from a different angle](/images/misc/after-same-gta-family-home-living-room-with-dustle.webp) Before After ‹› 

Greater Toronto Area

Main floor oak, sanded and refinished in 3 days

See the full before-and-after gallery →

[/gallery/ →](/gallery/)

Customer Reviews

## What Local Customers Say

5.0-star customer satisfaction across 500+ GTA hardwood projects. Initials and neighbourhood only, at our customers' request.

> "1,200 sq ft Rosedale red oak in 3 days, zero dust on furniture upstairs, finish looked brand-new. Family back day 4."

D.M., Rosedale$4,200

> "Came out stunning. Custom stain matched our 1960s oak main floor exactly. Non-slip finish for our dog."

J.K., Leaside$2,800

> "Three companies refused engineered. These guys measured wear layer depth, said yes, finish is pristine."

P.R., King West$3,200

## Neighbourhoods We Serve in Whitby

BrooklinDowntown WhitbyPort WhitbyWilliamsburgTaunton NorthRolling Acres

Postal codes we cover: L1M, L1N, L1P, L1R

Town of Whitby (Durham Region)

Got Questions?

## Brooklin and Whitby Floor FAQs

Do you install floors in Brooklin new builds?+

Yes, as an NWFA Certified Installer, with acclimation, moisture testing and proper expansion gaps.

Do you refinish older downtown Whitby homes?+

Yes, with Festool HEPA dustless sanding and a three-coat finish.

Do you serve Port Whitby?+

Yes, along with Williamsburg, Taunton North and Rolling Acres. In the north, Brooklin's historic downtown became a heritage district in 2008, and its newer subdivisions since the mid-1990s make up much of our installation work.

What does installation cost?+

$7-$18/sq ft installed, depending on species, product and pattern.

How long does a 1,000 sq ft refinish take?+

About 3 days, with furniture back by day 7.

### Still have a question about your floor?

Phones are answered 24/7. Live crew Monday to Saturday, 7am to 7pm.

Call (647) 503-3932

[tel:+16475033932 →](tel:+16475033932)

Request a Free Written Quote

[/contact/ →](/contact/)

Nearby Service Areas

## Hardwood Refinishing Near Whitby

Hardwood Refinishing Ajax Dustless refinishing, installs and stair recaps

[/service-areas/ajax/ →](/service-areas/ajax/)

 

Hardwood Refinishing Oshawa Dustless refinishing, installs and stair recaps

[/service-areas/oshawa/ →](/service-areas/oshawa/)

See all 18 service areas →

[/service-areas/ →](/service-areas/)

![Freshly refinished honey oak floor in an empty Toronto living room](/images/misc/empty-toronto-semi-living-room-with-freshly-refini.webp)

Phones answered 24/7 . Crews Mon-Sat 7am-7pm

## Book Hardwood Refinishing in Whitby

Written per-sq-ft quote within 24 hours. 24-hour quote. Festool HEPA dustless sanding on every job.

Request a Free Written Quote

[/contact/ →](/contact/)

 

Call (647) 503-3932

[tel:+16475033932 →](tel:+16475033932)

-   Written quote before work
-   Festool HEPA dustless
-   $2M liability + WSIB
-   5-year warranty