# Hardwood Refinishing Markham, ON | Markham Hardwood Refinishing: Dustless + Install for Residential & Commercial | NWFA

URL: https://hardwoodrefinishingtoronto.ca/service-areas/markham/

![Hardwood refinishing crew sanding an oak floor with HEPA extraction in a GTA home](/images/misc/hardwood-refinishing-crew-sanding-oak-floor-with-l.webp)

Serving Unionville, Markham Village, Cornell and more

# Hardwood Refinishing in Markham, from Unionville Heritage Homes to New Subdivisions

Hardwood refinishing in Markham spans original pine and oak in Unionville and Markham Village heritage homes and engineered floors in newer Cornell, Cathedraltown and Berczy Village subdivisions. We sand gently where the wood is old and check the wear layer where it is engineered.

Last updated: October 31, 2026

-   24-hour quote
-   Festool HEPA dustless
-   From $3/sq ft, written quote first

Request a Free Written Quote

[/contact/ →](/contact/)

 

Call (647) 503-3932

[tel:+16475033932 →](tel:+16475033932)

-   20+ Years Founded 2005
-   $2M Liability + WSIB COI in 24 hours
-   NWFA Certified Installer + Craftsman
-   500+ Projects 5.0-star satisfaction
-   24-Hr Written Quote 5-year warranty

Local Floor Problems

## Markham Hardwood Refinishing Problems in Old and New Homes

### Soft original pine in Unionville and Markham Village heritage homes

Your century home has original pine or oak floors with gaps, nail heads and old finish, and you are afraid a heavy sander will ruin them.

Why it happens here: Unionville and Markham Village are two of Markham's four heritage districts, and their 19th-century houses hold soft original boards that have been sanded before.

Our fix: We measure thickness first, set raised nails and sand with a planetary machine at gentle grits, then test stain on your own boards before the dustless refinish.

Get a Free Floor Assessment

[/contact/ →](/contact/)

-   ### Humidity swings
    
    GTA air runs from humid summers to dry, heated winters. Boards swell, then shrink, leaving cupping near exterior walls and gaps beside heat sources.
    
    Our fix: Moisture reading first, then board replacement and feather-sanding where needed
    
-   ### Winter salt and grit
    
    Boots carry salt across entries and kitchens all winter. The finish in those lanes usually breaks down within 3-4 winters.
    
    Our fix: Screen and recoat while the finish is still intact
    
-   ### Floors already sanded before
    
    Older oak and engineered veneers have limited wood left. An aggressive sand can expose tongues or the engineered core.
    
    Our fix: Thickness check at a vent before any quote
    

Services and Pricing

## Heritage Refinishing and Pattern Installs

The same crews, Festool HEPA equipment and published per-sq-ft rates behind our 

Toronto hardwood refinishing

[/ →](/)

 work, with no surprise surcharges. Most requested here: 

Hardwood Floor Sanding and Refinishing

[/services/hardwood-floor-refinishing/ →](/services/hardwood-floor-refinishing/)

.

Most requested in this area

 

![Hardwood floor sanding Toronto: Lagler Trio sander with Festool HEPA extraction on red oak](/images/misc/lagler-trio-planetary-sander-connected-to-festool-.webp) Most Requested

### Hardwood Floor Sanding and Refinishing

$3-$5/sq ft

Full sand-to-bare-wood refinishing: 3-grit progression, custom stain and a 3-coat Bona Traffic HD build. $3-$5/sq ft.

3-grit progression 36/60/100 on Lagler Trio . Festool HEPA extraction on every sander

View floor refinishing details

[Hardwood Floor Sanding and Refinishing →](/services/hardwood-floor-refinishing/)

 

![Hardwood floor installation Toronto: installer nailing white oak boards over underlayment](/images/misc/installer-kneeling-while-nailing-white-oak-hardwoo.webp) NWFA Certified

### Hardwood Floor Installation

$7-$18/sq ft

Solid and engineered hardwood, nail-down, glue-down or floating, in straight, herringbone, chevron, parquet, diagonal and picket layouts. $7-$18/sq ft installed.

Nail-down, glue-down and floating installs . Acclimation, MC testing, vapor barrier, expansion gaps

View installation details

[Hardwood Floor Installation →](/services/hardwood-floor-installation/)

 

![Dustless hardwood refinishing Toronto: Festool HEPA extractor connected to a floor sander](/images/misc/festool-ctm-hepa-dust-extractor-with-hose-connecte.webp) 99.97% Capture

### Dustless Hardwood Sanding

$3-$5/sq ft

Festool HEPA extraction connected to the Lagler Trio, edger and palm sanders. 99.97% capture, pet-safe. Included in published rates.

Festool HEPA, 99.97% particle capture . Connected Lagler Trio, edger and palm sanders

View dustless sanding details

[Dustless Hardwood Sanding →](/services/dustless-sanding/)

More services

 

![Stair refinishing Toronto: recapped oak staircase with stained treads and white risers](/images/misc/newly-recapped-oak-staircase-with-stained-bullnose.webp) Carpet-to-Hardwood

### Staircase Refinishing and Recapping

$15-$200/step

Refinish existing treads from $15-$40/step or recap carpeted stairs with new oak treads from $100-$200/step. 14-step recap $2K-$3.5K in 2-3 days.

Carpet and tack strip removal . Solid oak bullnose treads and new risers

View stairs details

[Staircase Refinishing and Recapping →](/services/staircase-refinishing-recapping/)

 

![Engineered hardwood refinishing Toronto: Lagler Trio on engineered oak in a King West condo](/images/misc/lagler-trio-sander-on-engineered-oak-floor-in-empt.webp) Others Refuse, We Measure

### Engineered Hardwood Refinishing

$4-$8/sq ft

We measure the wear layer before quoting. 2mm+ veneers are refinished with a light-grit 80/100/120 progression. $4-$8/sq ft.

Wear-layer measurement before quoting (2mm+ minimum) . Light-grit 80/100/120 progression

View engineered refinishing details

[Engineered Hardwood Refinishing →](/services/engineered-hardwood-refinishing/)

 

![Screen and recoat Toronto: 17-inch orbital with a 180-grit screen on a dull oak floor](/images/misc/17-inch-orbital-floor-buffer-with-180-grit-screen-.webp) One Day, No Sanding

### Screen and Recoat

$2-$3/sq ft

No-sand one-day refresh: 180-grit screen on a 17-inch orbital and a fresh topcoat. $2-$3/sq ft.

One-day turnaround . 180-grit screen on 17-inch orbital

View screen & recoat details

[Screen and Recoat →](/services/screen-and-recoat/)

![Vinyl flooring installation Toronto: oak-look LVP clicked into place in a basement suite](/images/misc/oak-look-luxury-vinyl-plank-being-clicked-into-pla.webp)

### Vinyl Flooring Installation

$5-$12/sq ft

LVP, LVT and waterproof vinyl installed over levelled subfloors. $5-$12/sq ft installed.

LVP, LVT and rigid-core waterproof vinyl . Subfloor levelling and moisture testing

View vinyl flooring details

[Vinyl Flooring Installation →](/services/vinyl-flooring-installation/)

![Laminate flooring installation Toronto: 12mm oak-look planks over underlayment](/images/misc/12mm-oak-look-laminate-planks-being-clicked-togeth.webp)

### Laminate Flooring Installation

$4-$9/sq ft

12mm AC4-rated click-lock laminate with proper underlayment and expansion gaps. $4-$9/sq ft installed.

12mm AC4-rated click-lock . Underlayment and vapor barrier

View laminate flooring details

[Laminate Flooring Installation →](/services/laminate-flooring-installation/)

How It Works

## How It Works, Heritage or New Build

1.  1
    
    ### Call or send the form
    
    Phones are answered 24/7. Tell us your neighbourhood, the rooms and roughly how many square feet.
    
2.  2
    
    ### Measure and moisture check
    
    Within 2-3 days we measure, read moisture with a pin-type meter and check how much wood is left.
    
3.  3
    
    ### Written per-sq-ft quote
    
    Every line in writing within 24 hours of the visit: sanding, stain, finish, repairs and access.
    
4.  4
    
    ### Dustless sand and finish
    
    Lagler Trio with Festool HEPA, then 3 coats of Bona Traffic HD. Socks at 24 hours, furniture by day 7.
    

## Heritage Floor or Chevron Upgrade? Book a Visit

Free on-site measure, a written per-sq-ft quote before any work, nothing due upfront on jobs under $3K and a 5-year workmanship warranty.

Call (647) 503-3932

[tel:+16475033932 →](tel:+16475033932)

 

Get a Written Quote

[/contact/ →](/contact/)

Why Us

## Why Unionville and Cornell Owners Trust Us

### Planetary sanding for Unionville and Markham Village heritage floors

### Chevron and herringbone installs for Cornell homes

### Wear-layer check before refinishing engineered

### Written quote within 24 hours

### Festool HEPA dustless sanding standard

Local Know-How

## Heritage Districts and New Urbanist Homes: Local Know-How

Markham holds four heritage districts, including **Unionville** and **Markham Village**. Their century homes often have original pine and oak that is softer and thinner than modern flooring.

A few kilometres away, **Cornell** was planned as a new urbanist community from 1997, with townhomes, semis and detached homes. Those floors are mostly engineered, and owners often add a chevron or herringbone foyer.

We treat the two very differently: gentle planetary sanding for heritage boards, and a wear-layer check before any engineered refinish.

### Unionville Heritage Floors and Newer Subdivisions

Homes in the Unionville Heritage Conservation District and around Main Street Markham Village often have original pine or oak floors that are soft, uneven or previously sanded. We check thickness, set nails and sand with a planetary machine for a gentle, even cut.

Cornell, Cathedraltown and Berczy Village subdivisions bring engineered floors and owners who want pattern upgrades. We install chevron and herringbone at a $2-$4/sq ft premium and refinish engineered floors only when the wear layer is 2mm or more.

Thornhill (Markham) and older parts of Unionville have 1970s-80s centre-hall homes with solid red oak and carpeted staircases. A full sand removes the orange tone that oil-based finishes left behind, and a 

stair recap

[/services/staircase-refinishing-recapping/ →](/services/staircase-refinishing-recapping/)

 at $100-$200 per step ties the hallway together. Berczy Village and Cornell homes often combine engineered main floors with hardwood stairs that are worn on the nosings first.

### Reaching Unionville and Cornell via the 404 and 407

Our crews use the 404 and Highway 7, with Berczy Village and Cathedraltown also a short drive from the 407. Most homes have driveway parking. We measure within 2-3 days and quote in writing within 24 hours.

Unionville Main Street and the Markham Village heritage area have tight streets and limited parking, so we plan equipment drop-off and parking in advance and note any costs on the written quote.

### Heritage Pine and Seasonal Gaps

Old pine floors move more than oak, so seasonal gaps in Unionville homes are normal through winter. We refinish in spring or fall where possible and recommend steady indoor humidity of 35-45%.

Before and After

## Recent Work Near You

Empty rooms, real light, different angles. Drag to compare.

![Before hardwood refinishing in a GTA family home: worn oak floor](/images/misc/before-empty-gta-family-home-living-room-with-worn.webp) ![After hardwood refinishing in a GTA family home: refreshed natural oak from a different angle](/images/misc/after-same-gta-family-home-living-room-with-dustle.webp) Before After ‹› 

Greater Toronto Area

Main floor oak, sanded and refinished in 3 days

See the full before-and-after gallery →

[/gallery/ →](/gallery/)

Customer Reviews

## What Local Customers Say

5.0-star customer satisfaction across 500+ GTA hardwood projects. Initials and neighbourhood only, at our customers' request.

> "1,200 sq ft Rosedale red oak in 3 days, zero dust on furniture upstairs, finish looked brand-new. Family back day 4."

D.M., Rosedale$4,200

> "Came out stunning. Custom stain matched our 1960s oak main floor exactly. Non-slip finish for our dog."

J.K., Leaside$2,800

> "Three companies refused engineered. These guys measured wear layer depth, said yes, finish is pristine."

P.R., King West$3,200

## Neighbourhoods We Serve in Markham

UnionvilleMarkham VillageCornellCathedraltownThornhill (Markham)Berczy Village

Postal codes we cover: L3P, L3R, L3S, L3T, L6B, L6C, L6E, L6G

City of Markham (York Region)

Got Questions?

## Common Markham Hardwood Questions

Can you refinish Unionville heritage floors?+

Yes, after a thickness check. We use a planetary sander for a gentle cut on old pine and oak and hand-detail the edges.

Do you install chevron in Cornell homes?+

Yes. Chevron adds $2-$4/sq ft to the installed price and 1-2 days per 500 sq ft.

Can Cathedraltown engineered floors be sanded?+

Yes, when the wear layer is at least 2mm; we check at a vent or transition first. Cathedraltown and Cornell, which began construction in 1997, mostly have engineered floors, and thinner veneers get a one-day screen and recoat instead of a sand.

Do you serve all of Markham?+

Yes. Markham has four heritage districts, Thornhill, Markham Village, Buttonville and Unionville, and we work in all of them as well as newer areas such as Berczy Village, Cornell and Cathedraltown.

How fast can you quote in Markham?+

Within 24 hours of the on-site measure, which we book within 2-3 days.

### Still have a question about your floor?

Phones are answered 24/7. Live crew Monday to Saturday, 7am to 7pm.

Call (647) 503-3932

[tel:+16475033932 →](tel:+16475033932)

Request a Free Written Quote

[/contact/ →](/contact/)

Nearby Service Areas

## Hardwood Refinishing Near Markham

Hardwood Refinishing Richmond Hill Dustless refinishing, installs and stair recaps

[/service-areas/richmond-hill/ →](/service-areas/richmond-hill/)

 

Hardwood Refinishing Scarborough Dustless refinishing, installs and stair recaps

[/service-areas/scarborough/ →](/service-areas/scarborough/)

 

Hardwood Refinishing Pickering Dustless refinishing, installs and stair recaps

[/service-areas/pickering/ →](/service-areas/pickering/)

 

Hardwood Refinishing Vaughan Dustless refinishing, installs and stair recaps

[/service-areas/vaughan/ →](/service-areas/vaughan/)

See all 18 service areas →

[/service-areas/ →](/service-areas/)

![Freshly refinished honey oak floor in an empty Toronto living room](/images/misc/empty-toronto-semi-living-room-with-freshly-refini.webp)

Phones answered 24/7 . Crews Mon-Sat 7am-7pm

## Request Markham Hardwood Refinishing Today

Written per-sq-ft quote within 24 hours. 24-hour quote. Festool HEPA dustless sanding on every job.

Request a Free Written Quote

[/contact/ →](/contact/)

 

Call (647) 503-3932

[tel:+16475033932 →](tel:+16475033932)

-   Written quote before work
-   Festool HEPA dustless
-   $2M liability + WSIB
-   5-year warranty