# Hardwood Refinishing Etobicoke, ON | Etobicoke Hardwood Refinishing: Dustless + Install for Residential & Commercial | NWFA

URL: https://hardwoodrefinishingtoronto.ca/service-areas/etobicoke/

![Hardwood refinishing crew sanding an oak floor with HEPA extraction in a GTA home](/images/misc/hardwood-refinishing-crew-sanding-oak-floor-with-l.webp)

Serving Humber Bay, The Kingsway, Islington Village and more

# Hardwood Refinishing in Etobicoke, from Humber Bay Condos to Kingsway Homes

Hardwood refinishing in Etobicoke means engineered floors in Humber Bay Shores and Mimico condo towers, and 1930s-50s solid oak in The Kingsway, Islington Village, Long Branch and Markland Wood. We repair water damage, sand dustless and match stain so repairs disappear.

Last updated: October 31, 2026

-   24-hour quote; on-site measure in 2-3 days
-   Festool HEPA dustless
-   From $3/sq ft, written quote first

Request a Free Written Quote

[/contact/ →](/contact/)

 

Call (647) 503-3932

[tel:+16475033932 →](tel:+16475033932)

At a glance

Years in the GTA

20+

GTA projects

500+

Written quote

24 hr

Warranty

5 yr

Neighbourhoods: Humber Bay, The Kingsway, Islington Village, Mimico, Long Branch

-   20+ Years Founded 2005
-   $2M Liability + WSIB COI in 24 hours
-   NWFA Certified Installer + Craftsman
-   500+ Projects 5.0-star satisfaction
-   24-Hr Written Quote 5-year warranty

Local Floor Problems

## Etobicoke Hardwood Refinishing Problems, From Leaks to Worn Oak

### Cupped boards after a leak in a damp Humber Bay tower

A dishwasher or sink leak leaves a patch of boards cupped and dark, and the rest of the floor looks fine.

Why it happens here: Lakeshore air runs more humid than inland, about 67.6% average afternoon humidity at the island station against 60.0% at Pearson, so wet engineered boards in lakefront towers dry slowly and keep moving.

Our fix: We dry the area, confirm moisture with a pin meter, replace only the damaged boards, then feather-sand and stain-match so the repair disappears into the room.

Get a Free Floor Assessment

[/contact/ →](/contact/)

-   ### Humidity swings
    
    GTA air runs from humid summers to dry, heated winters. Boards swell, then shrink, leaving cupping near exterior walls and gaps beside heat sources.
    
    Our fix: Moisture reading first, then board replacement and feather-sanding where needed
    
-   ### Winter salt and grit
    
    Boots carry salt across entries and kitchens all winter. The finish in those lanes usually breaks down within 3-4 winters.
    
    Our fix: Screen and recoat while the finish is still intact
    
-   ### Floors already sanded before
    
    Older oak and engineered veneers have limited wood left. An aggressive sand can expose tongues or the engineered core.
    
    Our fix: Thickness check at a vent before any quote
    

Services and Pricing

## Floor Services for Lakeshore Condos and Kingsway Homes

The same crews, Festool HEPA equipment and published per-sq-ft rates behind our 

Toronto hardwood refinishing

[/ →](/)

 work, with no surprise surcharges. Most requested here: 

Engineered Hardwood Refinishing

[/services/engineered-hardwood-refinishing/ →](/services/engineered-hardwood-refinishing/)

.

Most requested in this area

 

![Hardwood floor sanding Toronto: Lagler Trio sander with Festool HEPA extraction on red oak](/images/misc/lagler-trio-planetary-sander-connected-to-festool-.webp) Most Requested

### Hardwood Floor Sanding and Refinishing

$3-$5/sq ft

Full sand-to-bare-wood refinishing: 3-grit progression, custom stain and a 3-coat Bona Traffic HD build. $3-$5/sq ft.

3-grit progression 36/60/100 on Lagler Trio . Festool HEPA extraction on every sander

View floor refinishing details

[Hardwood Floor Sanding and Refinishing →](/services/hardwood-floor-refinishing/)

 

![Engineered hardwood refinishing Toronto: Lagler Trio on engineered oak in a King West condo](/images/misc/lagler-trio-sander-on-engineered-oak-floor-in-empt.webp) Others Refuse, We Measure

### Engineered Hardwood Refinishing

$4-$8/sq ft

We measure the wear layer before quoting. 2mm+ veneers are refinished with a light-grit 80/100/120 progression. $4-$8/sq ft.

Wear-layer measurement before quoting (2mm+ minimum) . Light-grit 80/100/120 progression

View engineered refinishing details

[Engineered Hardwood Refinishing →](/services/engineered-hardwood-refinishing/)

 

![Dustless hardwood refinishing Toronto: Festool HEPA extractor connected to a floor sander](/images/misc/festool-ctm-hepa-dust-extractor-with-hose-connecte.webp) 99.97% Capture

### Dustless Hardwood Sanding

$3-$5/sq ft

Festool HEPA extraction connected to the Lagler Trio, edger and palm sanders. 99.97% capture, pet-safe. Included in published rates.

Festool HEPA, 99.97% particle capture . Connected Lagler Trio, edger and palm sanders

View dustless sanding details

[Dustless Hardwood Sanding →](/services/dustless-sanding/)

More services

 

![Hardwood floor installation Toronto: installer nailing white oak boards over underlayment](/images/misc/installer-kneeling-while-nailing-white-oak-hardwoo.webp) NWFA Certified

### Hardwood Floor Installation

$7-$18/sq ft

Solid and engineered hardwood, nail-down, glue-down or floating, in straight, herringbone, chevron, parquet, diagonal and picket layouts. $7-$18/sq ft installed.

Nail-down, glue-down and floating installs . Acclimation, MC testing, vapor barrier, expansion gaps

View installation details

[Hardwood Floor Installation →](/services/hardwood-floor-installation/)

 

![Stair refinishing Toronto: recapped oak staircase with stained treads and white risers](/images/misc/newly-recapped-oak-staircase-with-stained-bullnose.webp) Carpet-to-Hardwood

### Staircase Refinishing and Recapping

$15-$200/step

Refinish existing treads from $15-$40/step or recap carpeted stairs with new oak treads from $100-$200/step. 14-step recap $2K-$3.5K in 2-3 days.

Carpet and tack strip removal . Solid oak bullnose treads and new risers

View stairs details

[Staircase Refinishing and Recapping →](/services/staircase-refinishing-recapping/)

 

![Screen and recoat Toronto: 17-inch orbital with a 180-grit screen on a dull oak floor](/images/misc/17-inch-orbital-floor-buffer-with-180-grit-screen-.webp) One Day, No Sanding

### Screen and Recoat

$2-$3/sq ft

No-sand one-day refresh: 180-grit screen on a 17-inch orbital and a fresh topcoat. $2-$3/sq ft.

One-day turnaround . 180-grit screen on 17-inch orbital

View screen & recoat details

[Screen and Recoat →](/services/screen-and-recoat/)

![Vinyl flooring installation Toronto: oak-look LVP clicked into place in a basement suite](/images/misc/oak-look-luxury-vinyl-plank-being-clicked-into-pla.webp)

### Vinyl Flooring Installation

$5-$12/sq ft

LVP, LVT and waterproof vinyl installed over levelled subfloors. $5-$12/sq ft installed.

LVP, LVT and rigid-core waterproof vinyl . Subfloor levelling and moisture testing

View vinyl flooring details

[Vinyl Flooring Installation →](/services/vinyl-flooring-installation/)

![Laminate flooring installation Toronto: 12mm oak-look planks over underlayment](/images/misc/12mm-oak-look-laminate-planks-being-clicked-togeth.webp)

### Laminate Flooring Installation

$4-$9/sq ft

12mm AC4-rated click-lock laminate with proper underlayment and expansion gaps. $4-$9/sq ft installed.

12mm AC4-rated click-lock . Underlayment and vapor barrier

View laminate flooring details

[Laminate Flooring Installation →](/services/laminate-flooring-installation/)

How It Works

## How Your Floor Gets Done

1.  1
    
    ### Call or send the form
    
    Phones are answered 24/7. Tell us your neighbourhood, the rooms and roughly how many square feet.
    
2.  2
    
    ### Measure and moisture check
    
    Within 2-3 days we measure, read moisture with a pin-type meter and check how much wood is left.
    
3.  3
    
    ### Written per-sq-ft quote
    
    Every line in writing within 24 hours of the visit: sanding, stain, finish, repairs and access.
    
4.  4
    
    ### Dustless sand and finish
    
    Lagler Trio with Festool HEPA, then 3 coats of Bona Traffic HD. Socks at 24 hours, furniture by day 7.
    

## Leak or Worn Finish? Get It Assessed

Free on-site measure, a written per-sq-ft quote before any work, nothing due upfront on jobs under $3K and a 5-year workmanship warranty.

Call (647) 503-3932

[tel:+16475033932 →](tel:+16475033932)

 

Get a Written Quote

[/contact/ →](/contact/)

Why Us

## Why Lakeshore Condo Owners Trust Our Crews

### Water-damaged boards replaced, feather-sanded and stain-matched

### Wear-layer check before quoting Humber Bay and Mimico condos

### Dustless refinishing for Kingsway and Islington heritage oak

### Moisture readings with a pin-type meter before any sanding

### COI and Net-30 for Etobicoke property managers

### 5-year workmanship warranty on every refinish

Local Know-How

## Lakeshore Towers and Kingsway Oak: Local Know-How

Etobicoke has two floor stories. Lakefront towers in **Humber Bay Shores** and along Lake Shore Boulevard bring engineered floors, condo paperwork and the damp air off Lake Ontario.

Inland, **The Kingsway** and **Islington Village** grew out of Robert Home Smith's Humber Valley plans from around 1900. Those homes often have solid oak with character worth keeping, so we sand dustless and test stain on your own boards.

Mimico and Long Branch were their own towns until 1967, and their older houses mix both worlds: original strip oak on the main floor, newer engineered upstairs.

### Water Damage, Engineered Condos and 1930s Oak

Leaks are the most common reason lakeshore owners call us. In one Humber Bay kitchen, a dishwasher leak cupped a run of oak boards. We let the subfloor dry, confirmed moisture content with a pin-type meter, replaced only the damaged boards, then feather-sanded the room and matched the stain so the repair line is invisible. Repairs like this typically cost $600-$3,000.

The Kingsway and Islington Village have some of the city's best 1930s-50s solid oak, often with borders and character worth keeping. We refinish these with Festool HEPA 

dustless sanding

[/services/dustless-sanding/ →](/services/dustless-sanding/)

 and custom stain. Engineered floors in Mimico and Humber Bay condos can be sanded if the wear layer is 2mm or more; if not, a 

screen and recoat

[/services/screen-and-recoat/ →](/services/screen-and-recoat/)

 is the safer option.

### Lakeshore Towers and Kingsway Driveways

Etobicoke splits into two job types. Along the lakeshore in Humber Bay Shores and Mimico, we work inside condo towers: certificate of insurance to the corporation within 24 hours, freight elevator bookings and protection for lobbies and hallways. Inland, in The Kingsway, Islington Village and Markland Wood, detached homes with driveways make setup quick.

Crews reach the area along the Gardiner, the QEW and Bloor Street West. We schedule on-site measures within 2-3 days and send a written per-sq-ft quote within 24 hours of the visit. Etobicoke property managers get Net-30 terms and same-day COIs.

### Lakefront Humidity and Your Floors

Homes and towers near Lake Ontario see higher summer humidity than the rest of the city, which can push boards to crown or cup. We wait for moisture content to stabilise before sanding and recommend keeping indoor humidity between 35% and 45% year-round. Water-based Bona Traffic HD handles these swings well and stays clear on white oak.

Before and After

## Recent Work in This Area

Empty rooms, real light, different angles. Drag to compare.

![Before water damage repair Etobicoke: cupped oak boards in a Humber Bay kitchen](/images/misc/before-empty-humber-bay-kitchen-with-cupped-water-.webp) ![After water damage repair Etobicoke: stain-matched oak boards in a Humber Bay kitchen](/images/misc/after-empty-humber-bay-kitchen-with-replaced-oak-b.webp) Before After ‹› 

Humber Bay

Etobicoke Water Damage Repair

See the full before-and-after gallery →

[/gallery/ →](/gallery/)

Customer Reviews

## What Local Customers Say

5.0-star customer satisfaction across 500+ GTA hardwood projects. Initials and neighbourhood only, at our customers' request.

> "1,200 sq ft Rosedale red oak in 3 days, zero dust on furniture upstairs, finish looked brand-new. Family back day 4."

D.M., Rosedale$4,200

> "Came out stunning. Custom stain matched our 1960s oak main floor exactly. Non-slip finish for our dog."

J.K., Leaside$2,800

> "Three companies refused engineered. These guys measured wear layer depth, said yes, finish is pristine."

P.R., King West$3,200

## Neighbourhoods We Serve in Etobicoke

Humber BayThe KingswayIslington VillageMimicoLong BranchMarkland Wood

Postal codes we cover: M8V, M8W, M8X, M8Y, M8Z, M9A, M9B, M9C

City of Toronto (Etobicoke York district)

Got Questions?

## Common Etobicoke Hardwood Questions

Can you repair water-damaged boards in a Humber Bay condo?+

Yes. We dry and moisture-test the subfloor, replace the damaged boards, then feather-sand and stain-match so the repair blends in. A Humber Bay dishwasher-leak repair is one of our recent Etobicoke projects.

Do you refinish Kingsway heritage floors?+

Yes, with Festool HEPA dustless sanding, custom stain test patches and three coats of water-based or oil-based finish. We measure remaining thickness before quoting.

Can engineered floors in Mimico condos be refinished?+

If the wear layer is 2mm or thicker, yes, using a light-grit 80/100/120 progression. Lakeshore air is damper than inland, about 67.6% average afternoon humidity at the island station versus 60.0% at Pearson, so we read moisture in the boards first. Thinner veneers get a screen and recoat instead.

What does water damage repair cost?+

Typically $600-$3,000, depending on how many boards need replacing and whether the whole room is refinished to blend the colour.

Do you serve Etobicoke property managers?+

Yes. We offer Net-30 terms, COIs within 24 hours and multi-unit pricing from $3/sq ft.

### Still have a question about your floor?

Phones are answered 24/7. Live crew Monday to Saturday, 7am to 7pm.

Call (647) 503-3932

[tel:+16475033932 →](tel:+16475033932)

Request a Free Written Quote

[/contact/ →](/contact/)

Nearby Service Areas

## Hardwood Refinishing Near Etobicoke

Hardwood Refinishing York Dustless refinishing, installs and stair recaps

[/service-areas/york/ →](/service-areas/york/)

 

Hardwood Refinishing Downtown Toronto Dustless refinishing, installs and stair recaps

[/service-areas/downtown-toronto/ →](/service-areas/downtown-toronto/)

 

Hardwood Refinishing Mississauga Dustless refinishing, installs and stair recaps

[/service-areas/mississauga/ →](/service-areas/mississauga/)

 

Hardwood Refinishing North York Dustless refinishing, installs and stair recaps

[/service-areas/north-york/ →](/service-areas/north-york/)

See all 18 service areas →

[/service-areas/ →](/service-areas/)

![Freshly refinished honey oak floor in an empty Toronto living room](/images/misc/empty-toronto-semi-living-room-with-freshly-refini.webp)

Phones answered 24/7 . Crews Mon-Sat 7am-7pm

## Request Etobicoke Hardwood Refinishing Now

Written per-sq-ft quote within 24 hours. 24-hour quote; on-site measure in 2-3 days. Festool HEPA dustless sanding on every job.

Request a Free Written Quote

[/contact/ →](/contact/)

 

Call (647) 503-3932

[tel:+16475033932 →](tel:+16475033932)

-   Written quote before work
-   Festool HEPA dustless
-   $2M liability + WSIB
-   5-year warranty