# Hardwood Refinishing Aurora, ON | Aurora Hardwood Refinishing: Dustless + Install for Residential & Commercial | NWFA

URL: https://hardwoodrefinishingtoronto.ca/service-areas/aurora/

![Hardwood refinishing crew sanding an oak floor with HEPA extraction in a GTA home](/images/misc/hardwood-refinishing-crew-sanding-oak-floor-with-l.webp)

Serving Downtown Aurora (Yonge and Wellington), Aurora Highlands, Bayview Wellington and more

# Hardwood Refinishing in Aurora for Older Downtown Homes and Newer Subdivisions

Hardwood refinishing in Aurora covers original hardwood in older homes around Yonge and Wellington and Aurora Village, and newer subdivision floors in Aurora Highlands, Bayview Wellington and the Hills of St Andrew, where winter salt wear in entries is the most common complaint.

Last updated: October 31, 2026

-   24-hour quote
-   Festool HEPA dustless
-   From $3/sq ft, written quote first

Request a Free Written Quote

[/contact/ →](/contact/)

 

Call (647) 503-3932

[tel:+16475033932 →](tel:+16475033932)

-   20+ Years Founded 2005
-   $2M Liability + WSIB COI in 24 hours
-   NWFA Certified Installer + Craftsman
-   500+ Projects 5.0-star satisfaction
-   24-Hr Written Quote 5-year warranty

Local Floor Problems

## Aurora Hardwood Refinishing Problems, Heritage to Subdivision

### Original boards in Northeast Old Aurora heritage homes

The original hardwood in your older house near Yonge and Wellington is grey and patched, and you want it restored, not replaced.

Why it happens here: Northeast Old Aurora is a heritage district designated in 2006, and its homes predate the growth that took Aurora from 8,791 people in 1961 to over 62,000, so floors have had decades of repairs.

Our fix: We measure remaining thickness, weave in matching boards where patches were made, then sand dustless at gentle grits. Newer subdivision floors usually need only a recoat.

Get a Free Floor Assessment

[/contact/ →](/contact/)

-   ### Humidity swings
    
    GTA air runs from humid summers to dry, heated winters. Boards swell, then shrink, leaving cupping near exterior walls and gaps beside heat sources.
    
    Our fix: Moisture reading first, then board replacement and feather-sanding where needed
    
-   ### Winter salt and grit
    
    Boots carry salt across entries and kitchens all winter. The finish in those lanes usually breaks down within 3-4 winters.
    
    Our fix: Screen and recoat while the finish is still intact
    
-   ### Floors already sanded before
    
    Older oak and engineered veneers have limited wood left. An aggressive sand can expose tongues or the engineered core.
    
    Our fix: Thickness check at a vent before any quote
    

Services and Pricing

## Heritage Restoration and Recoats

The same crews, Festool HEPA equipment and published per-sq-ft rates behind our 

Toronto hardwood refinishing

[/ →](/)

 work, with no surprise surcharges. Most requested here: 

Hardwood Floor Sanding and Refinishing

[/services/hardwood-floor-refinishing/ →](/services/hardwood-floor-refinishing/)

.

Most requested in this area

 

![Hardwood floor sanding Toronto: Lagler Trio sander with Festool HEPA extraction on red oak](/images/misc/lagler-trio-planetary-sander-connected-to-festool-.webp) Most Requested

### Hardwood Floor Sanding and Refinishing

$3-$5/sq ft

Full sand-to-bare-wood refinishing: 3-grit progression, custom stain and a 3-coat Bona Traffic HD build. $3-$5/sq ft.

3-grit progression 36/60/100 on Lagler Trio . Festool HEPA extraction on every sander

View floor refinishing details

[Hardwood Floor Sanding and Refinishing →](/services/hardwood-floor-refinishing/)

 

![Screen and recoat Toronto: 17-inch orbital with a 180-grit screen on a dull oak floor](/images/misc/17-inch-orbital-floor-buffer-with-180-grit-screen-.webp) One Day, No Sanding

### Screen and Recoat

$2-$3/sq ft

No-sand one-day refresh: 180-grit screen on a 17-inch orbital and a fresh topcoat. $2-$3/sq ft.

One-day turnaround . 180-grit screen on 17-inch orbital

View screen & recoat details

[Screen and Recoat →](/services/screen-and-recoat/)

 

![Dustless hardwood refinishing Toronto: Festool HEPA extractor connected to a floor sander](/images/misc/festool-ctm-hepa-dust-extractor-with-hose-connecte.webp) 99.97% Capture

### Dustless Hardwood Sanding

$3-$5/sq ft

Festool HEPA extraction connected to the Lagler Trio, edger and palm sanders. 99.97% capture, pet-safe. Included in published rates.

Festool HEPA, 99.97% particle capture . Connected Lagler Trio, edger and palm sanders

View dustless sanding details

[Dustless Hardwood Sanding →](/services/dustless-sanding/)

More services

 

![Hardwood floor installation Toronto: installer nailing white oak boards over underlayment](/images/misc/installer-kneeling-while-nailing-white-oak-hardwoo.webp) NWFA Certified

### Hardwood Floor Installation

$7-$18/sq ft

Solid and engineered hardwood, nail-down, glue-down or floating, in straight, herringbone, chevron, parquet, diagonal and picket layouts. $7-$18/sq ft installed.

Nail-down, glue-down and floating installs . Acclimation, MC testing, vapor barrier, expansion gaps

View installation details

[Hardwood Floor Installation →](/services/hardwood-floor-installation/)

 

![Stair refinishing Toronto: recapped oak staircase with stained treads and white risers](/images/misc/newly-recapped-oak-staircase-with-stained-bullnose.webp) Carpet-to-Hardwood

### Staircase Refinishing and Recapping

$15-$200/step

Refinish existing treads from $15-$40/step or recap carpeted stairs with new oak treads from $100-$200/step. 14-step recap $2K-$3.5K in 2-3 days.

Carpet and tack strip removal . Solid oak bullnose treads and new risers

View stairs details

[Staircase Refinishing and Recapping →](/services/staircase-refinishing-recapping/)

 

![Engineered hardwood refinishing Toronto: Lagler Trio on engineered oak in a King West condo](/images/misc/lagler-trio-sander-on-engineered-oak-floor-in-empt.webp) Others Refuse, We Measure

### Engineered Hardwood Refinishing

$4-$8/sq ft

We measure the wear layer before quoting. 2mm+ veneers are refinished with a light-grit 80/100/120 progression. $4-$8/sq ft.

Wear-layer measurement before quoting (2mm+ minimum) . Light-grit 80/100/120 progression

View engineered refinishing details

[Engineered Hardwood Refinishing →](/services/engineered-hardwood-refinishing/)

![Vinyl flooring installation Toronto: oak-look LVP clicked into place in a basement suite](/images/misc/oak-look-luxury-vinyl-plank-being-clicked-into-pla.webp)

### Vinyl Flooring Installation

$5-$12/sq ft

LVP, LVT and waterproof vinyl installed over levelled subfloors. $5-$12/sq ft installed.

LVP, LVT and rigid-core waterproof vinyl . Subfloor levelling and moisture testing

View vinyl flooring details

[Vinyl Flooring Installation →](/services/vinyl-flooring-installation/)

![Laminate flooring installation Toronto: 12mm oak-look planks over underlayment](/images/misc/12mm-oak-look-laminate-planks-being-clicked-togeth.webp)

### Laminate Flooring Installation

$4-$9/sq ft

12mm AC4-rated click-lock laminate with proper underlayment and expansion gaps. $4-$9/sq ft installed.

12mm AC4-rated click-lock . Underlayment and vapor barrier

View laminate flooring details

[Laminate Flooring Installation →](/services/laminate-flooring-installation/)

How It Works

## How Your Floor Is Restored

1.  1
    
    ### Call or send the form
    
    Phones are answered 24/7. Tell us your neighbourhood, the rooms and roughly how many square feet.
    
2.  2
    
    ### Measure and moisture check
    
    Within 2-3 days we measure, read moisture with a pin-type meter and check how much wood is left.
    
3.  3
    
    ### Written per-sq-ft quote
    
    Every line in writing within 24 hours of the visit: sanding, stain, finish, repairs and access.
    
4.  4
    
    ### Dustless sand and finish
    
    Lagler Trio with Festool HEPA, then 3 coats of Bona Traffic HD. Socks at 24 hours, furniture by day 7.
    

## Original Floor Worth Saving? Find Out

Free on-site measure, a written per-sq-ft quote before any work, nothing due upfront on jobs under $3K and a 5-year workmanship warranty.

Call (647) 503-3932

[tel:+16475033932 →](tel:+16475033932)

 

Get a Written Quote

[/contact/ →](/contact/)

Why Us

## Why Old Aurora Owners Trust Our Crews

### Screen and recoat for salt-worn entries

### Dustless refinishing for older downtown homes

### Wear-layer check for newer engineered floors

### Measure within 2-3 days, quote within 24 hours

Local Know-How

## Heritage Core and Newer Streets: Local Know-How

Aurora is noted for keeping its historic core. **Northeast Old Aurora** became a heritage district in 2006, and the homes around **Yonge and Wellington** often still have original hardwood with patches from earlier owners.

The rest of town is newer: Aurora grew from 8,791 people in 1961 to 62,057 in 2021, with the **Hills of St Andrew** filling in during the 1980s. Those floors mostly need a recoat where winter boots wear the finish at entries and kitchens.

We can usually measure within 2-3 days of your call.

### Original Hardwood and Salt-Worn Entries

Older homes around Yonge and Wellington and in Aurora Village have original hardwood that refinishes well after a thickness check. Newer subdivisions in Aurora Highlands and Bayview Wellington see winter salt wear in entries and kitchens. If the finish is still intact under the dullness, a 

screen and recoat

[/services/screen-and-recoat/ →](/services/screen-and-recoat/)

 at $2-$3/sq ft restores the sheen in one day without sanding.

Aurora Village and the streets around Yonge and Wellington have homes from the early 1900s through the 1950s, some with original fir or pine as well as oak. Softer species dent easily and sand faster, so we use a gentle planetary approach and recommend a durable water-based finish such as Bona Traffic HD. In Aurora Highlands, Bayview Wellington and the Hills of St Andrew, homes from the 1980s onward usually have solid oak main floors and carpeted stairs, which makes a refinish plus 

stair recap

[/services/staircase-refinishing-recapping/ →](/services/staircase-refinishing-recapping/)

 the most common project. Engineered floors in the newest subdivisions are refinished only after we confirm a 2mm or thicker wear layer.

### Aurora Scheduling

We arrive along Yonge Street and the 404 via Wellington Street East. On-site measures happen within 2-3 days and the written per-sq-ft quote follows within 24 hours.

We schedule work here as full-day crew visits and plan sanding, stain and coats so you know which rooms are off-limits each day. Phones are answered 24/7, and the live crew works Monday to Saturday, 7am to 7pm.

### Salt Season Tips

Winters this far north are long. Boot trays, entry mats and a damp mop with a pH-neutral cleaner after salt days keep the finish from breaking down. A recoat every 3-5 years delays a full sand.

Before and After

## Recent Work Near You

Empty rooms, real light, different angles. Drag to compare.

![Before hardwood refinishing in a GTA family home: worn oak floor](/images/misc/before-empty-gta-family-home-living-room-with-worn.webp) ![After hardwood refinishing in a GTA family home: refreshed natural oak from a different angle](/images/misc/after-same-gta-family-home-living-room-with-dustle.webp) Before After ‹› 

Greater Toronto Area

Main floor oak, sanded and refinished in 3 days

See the full before-and-after gallery →

[/gallery/ →](/gallery/)

Customer Reviews

## What Local Customers Say

5.0-star customer satisfaction across 500+ GTA hardwood projects. Initials and neighbourhood only, at our customers' request.

> "1,200 sq ft Rosedale red oak in 3 days, zero dust on furniture upstairs, finish looked brand-new. Family back day 4."

D.M., Rosedale$4,200

> "Came out stunning. Custom stain matched our 1960s oak main floor exactly. Non-slip finish for our dog."

J.K., Leaside$2,800

> "Three companies refused engineered. These guys measured wear layer depth, said yes, finish is pristine."

P.R., King West$3,200

## Neighbourhoods We Serve in Aurora

Downtown Aurora (Yonge and Wellington)Aurora HighlandsBayview WellingtonAurora VillageHills of St Andrew

Postal codes we cover: L4G

Town of Aurora (York Region)

Got Questions?

## Hardwood Questions From Aurora Homeowners

Can salt-worn entries be fixed without a full sand?+

Often, yes. If the finish has not worn through to bare wood, a screen and recoat at $2-$3/sq ft restores it in one day.

Do you refinish older downtown Aurora homes?+

Yes. Northeast Old Aurora has been a heritage district since 2006, and many homes near Yonge and Wellington still have original hardwood. We check the remaining board thickness first, then sand with Festool HEPA dustless equipment.

Do you serve Aurora Highlands?+

Yes, along with Bayview Wellington, Aurora Village and the Hills of St Andrew.

What about engineered floors in newer subdivisions?+

We refinish them if the wear layer is 2mm or more; otherwise a recoat is the safer option.

How soon can you measure?+

Within 2-3 days of your call, with a written quote within 24 hours of the visit.

### Still have a question about your floor?

Phones are answered 24/7. Live crew Monday to Saturday, 7am to 7pm.

Call (647) 503-3932

[tel:+16475033932 →](tel:+16475033932)

Request a Free Written Quote

[/contact/ →](/contact/)

Nearby Service Areas

## Hardwood Refinishing Near Aurora

Hardwood Refinishing Newmarket Dustless refinishing, installs and stair recaps

[/service-areas/newmarket/ →](/service-areas/newmarket/)

 

Hardwood Refinishing Richmond Hill Dustless refinishing, installs and stair recaps

[/service-areas/richmond-hill/ →](/service-areas/richmond-hill/)

See all 18 service areas →

[/service-areas/ →](/service-areas/)

![Freshly refinished honey oak floor in an empty Toronto living room](/images/misc/empty-toronto-semi-living-room-with-freshly-refini.webp)

Phones answered 24/7 . Crews Mon-Sat 7am-7pm

## Book Aurora Hardwood Refinishing

Written per-sq-ft quote within 24 hours. 24-hour quote. Festool HEPA dustless sanding on every job.

Request a Free Written Quote

[/contact/ →](/contact/)

 

Call (647) 503-3932

[tel:+16475033932 →](tel:+16475033932)

-   Written quote before work
-   Festool HEPA dustless
-   $2M liability + WSIB
-   5-year warranty